Mebac® Plate Products

Mebac® slip-resistant surfaces are available from Harsco Industrial IKG (IKG) in various surface options for most standard size shapes and plates, including carbon steel, aluminum and stainless steel. Standard size plates will be furnished to standard mill tolerances on length, width and squareness. In installations where the plates will be laid side-by-side and tighter tolerances required to assure satisfactory fit-up, dimension tolerances should be specified. Our National Sales Office will be happy to provide details and assistance. To protect the surface of Mebac© on Mill Finished Steel from rusting if exposed to moisture, IKG recommends that a quality rust inhibitive coating be applied after application.

Features

• Available in various surface options for most commercially available standard size plates
  
• Consistently high C.O.F. under a wide range of conditions
  
• Provides margins of safety unmatched in the industry
  
• Listed as slip resistant by Underwriters Laboratories
  

Advantages

• Durable
  
• Versatile
  
• Economical due to its long life cycle
  
• Low maintenance
  
• Apply once, it provides slip resistance for years
  

Available In

• Carbon Steel Plate
• 1/8” through 1” thick
• Maximum width of 60” X maximum length of 240”
• Available with Steel Mebac® # 1, #2, #3, or #4  surface
• Available with Aluminum Mebac® #1, #2, #4, or E-Z  Weld surface
  
• Aluminum Plate (Specify alloy required)
• 1/4” through 1” thick
• Maximum width of 60” X maximum length of 240”
• Available with Aluminum Mebac® #1, #2, #4, or E-Z Weld surface
  
• Stainless Steel Plate (Specify alloy required)
• 1/4” through 1/2” thick
• Maximum width of 60” X maximum length of 20’
• Available with Aluminum Mebac® #4 surface
• Available with Stainless Steel Mebac® #4 surface
  

Special Considerations

• Standard size plates are furnished with mill tolerances in length, width and squareness
  
• Dimension tolerances should be specified for installations where the plates will be laid side-by-side and tighter tolerances required to assure satisfactory fit-up
  
• When hot-dipped galvanizing, prescribed processes should be followed. Galvanizing Guidelines
• Contact IKG’s National Sales Office for more details
  

Surface Options

Finishes

• Mill Finish Carbon Steel Mebac® will rust readily if exposed to moisture. Care must be taken during transit and storage to protect from moisture. IKG recommends a quality rust inhibitive coating be applied after application of Mill Finished Carbon Steel Mebac® to protect the surface from rusting.
  

Mebac® Reviews